|
Docking Device |
Docking Device Description |
PRICE |
|

|
This docking device is for use with most scooters with a seat post. To use this device, the seat of the scooter must be removed so the hook on the strap can be attached unless it is used with a C-Arm, which allows the seat to be left on the scooter while being lifted. The loop is adjustable to allow the vehicle to be lifted over its center of gravity. The generic docking device (Part DD16) is the minimum device required to lift most scooters. |
|
T-Bar Device Part# DD16 (Must Remove Seat, Can't Use C-Arm) |
|
Free W/ Lift Purchase |
|
T-Bar Device Part# DD17 (Must Remove Seat, Can't Use C-Arm) |
|
$59.99 | |
|

|
Unlike the T-Bar Docking Device (Above), the C-Arm can be used to lift the scooter without having to remove the seat. The C-Arm consists of two parts: Part A is permanently mounted to the scooter seat post. Part B has the T-Bar Pickup, goes around the seat and slides into Part A.

|
|
Adjustable C-Arm Device Part# DD19 (Max 12" opening) |
|
$139.99 |
|
|


|
Power Chair Bridles Part# DD14 The Bridles May Be Bought Separate If Needed Later |
|
Spreader Bar - Part# DD20 This device is used for lifting different types of power chairs that have the seat mounted to the frame, not on a post. This unit allows the chair to be lifted by hooking to the frame of the chair. This device spans the seat of the chair and picks it up from the sides.
Spreader Bar With Power Chair Bridles - Part# DD21 This docking device is ued when the other types of docking devices are not applicable. The bridles attach to the frame of the power chair and are used in conjunction with the spreader bar. The lift brackets attach by using existing bolt holes on the chair's frame.

|
|
Spreader Bar Part# DD20 |
|
$139.99 |
|
Spreader Bar W/ Power Chair Bridle Option Part# DD21 |
|
$179.99 |
|
Power Chair Bridles
Part# DD14 |
|
$89.99 | |